产品>

工业蜂窝网络 >> 工业蜂窝网关

OnCell 5004-HSPA/OnCell 5104-HSPA

工业five-band GSM / GPRS / EDGE / UMTS / HSPA无线路由器

  • 关于产品

Features and Benefits  

  • Five band UMTS/HSPA 800/850/AWS/1900/2100 MHz

  • Quad-band GSM/GPRS/EDGE 850/900/1800/1900 MHz

  • Cellular WAN and Ethernet WAN backup mechanism for a complete path redundancy

  • Primary and secondary power inputs for power source redundancy

  • Cellular link redundancy with dual-SIM GuaranLink support

  • DIN-rail housing and wall-mountable housing

  • Connect to 4 10/100BaseT(X) devices over an integrated VPN

  • 2 digital inputs and 1 relay output (OnCell 5104-HSPA only)

  • Centralize private IP management with OnCell Central Manager

Introduction 

The OnCell 5004/5104-HSPA series are high-performance industrial grade cellular routers that allow up to 4 Ethernet-based devices to simultaneously use a single cellular data account for primary or backup network connectivity to remote sites and devices. Both products provide the functionality of a cellular router, firewall, and switch in one device, and to ensure zero data loss and on-demand cellular communication, the OnCell 5004/5104-HSPA are integrated with the GuaranLink function. The difference between the OnCell 5004-HSPA and OnCell 5104-HSPA is that the OnCell 5104-HSPA comes with a built-in relay output that can be configured to indicate the priority of events when notifying or warning engineers in the field, and the two digital inputs allow you to connect basic I/O devices, such as sensors, to the cellular network. The OnCell 5004-HSPA can be placed on a desktop or wall-mounted, whereas the OnCell 5104-HSPA has an IA design and can be attached to a DIN-rail. Both products use 12 to 48 VDC power inputs with a screw-on design for greater reliability, and the Ethernet ports come with 1.5 KV magnetic isolation protection to keep your system safe from unexpected electrical discharges.

Cellular Interface
StandardsGSM/GPRS/EDGE/UMTS/HSPA
Band Options• Five-band UMTS/HSPA 800/850/AWS/1900/2100 MHz
• Quad-band GSM/GPRS/EDGE 850/900/1800/1900 MHz
HSPA Data Rate14.4 Mbps DL, 5.76 Mbps UL
EDGE Multi-slot ClassClass 12
EDGE Data Rate237 kbps DL, 237 kbps UL
EDGE Terminal Device ClassClass B
GPRS Multi-slot ClassClass 12
GPRS Data Rate85.6 kbps DL, 85.6 kbps UL
GPRS Terminal Device ClassClass B
GPRS Coding SchemesCS1 to CS4
Tx PowerUMTS/HSPA: 0.25 W
EDGE900: 0.5 W
EDGE1800: 0.4 W
GSM1800: 1 W
GSM900: 2 W
• WAN Interface
Number of Ports1
Ethernet10/100 Mbps, RJ45 connector, auto MDI/MDIX
• LAN Interface
Number of Ports4
Ethernet10/100 Mbps, RJ45 connector, auto MDI/MDIX
• Interface
Cellular Antenna Connectors1, SMA (female)
Console PortRS-232 (RJ45)
• I/O Interface (OnCell 5104-HSPA)
Alarm Contact1 relay output with current carrying capacity of 1 A @ 24 VDC
Digital Inputs2 electrically isolated inputs• +13 to +30 V for state “1” 
• +3 to -30 V for state “0”
• Software
Network ProtocolsARP, DDNS, DHCP/BOOTP, DNS Relay, HTTP, HTTPS, ICMP, IPSec, PPP, PPPoE, SMTP, SNTP, SSL, TCP/IP, Telnet, UDP
Routing/FirewallNAT, port forwarding, WAN IP filtering, static route
Cellular ConnectivityGuaranLink
AuthenticationLocal username and password
• Management Software
UtilitiesWireless Search Utility
Configuration and Management OptionsSNMP v1/v2c/v3, Web/Telnet/Serial Console, SSH, Remote SMS Control, Auto IP Report
Centralized Device Management, Monitoring and Private IP SolutionOnCell Central Manager
• SIM Interface
Number of SIMs2
SIM Control3 V
• Physical Characteristics
HousingAluminum, providing IP30 protection
WeightOnCell 5004-HSPA: 510 g (1.12 lb)
OnCell 5104-HSPA: 650 g (1.43 lb)
DimensionsOnCell 5004-HSPA: 158 x 103 x 35 mm (6.22 x 4.06 x 1.38 in)
OnCell 5104-HSPA: 51 x 135 x 103 mm (2 x 5.32 x 4.16 in)
• Environmental Limits
Operating TemperatureStandard Models: -30 to 55°C (-22 to 131°F)
Wide Temp. Models: -30 to 70°C (-22 to 158°F)
Storage Temperature-40 to 75°C (-40 to 167°F)
Ambient Relative Humidity5 to 95% (non-condensing)
• Power Requirements
Number of Power InputsOnCell 5004-HSPA: 2 (1 terminal block, 1 power jack) 
OnCell 5104-HSPA: 2 (terminal block), redundant dual inputs
Input Voltage12 to 48 VDC
Input CurrentOnCell 5004-HSPA: 0.9 A @ 12 VDC; 0.23 A @ 48 VDC 
OnCell 5104-HSPA: 0.95 A @ 12 VDC; 0.25 A @ 48 VDC
Reverse Polarity ProtectionPresent (OnCell 5104-HSPA only)
• Standards and Certifications
SafetyUL 60950-1
EMCEN 55032/24
EMICISPR 32, FCC Part 15B Class A
EMSIEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 4 kV; Signal: 1 kV
IEC 61000-4-5 Surge: Power: 1 kV; Signal: 1 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8
RadioFCC Part 22H, FCC Part 24E, EN 301 489-1, EN 301 489-7, EN 301 489-24, EN 301 511, EN 301 908
• MTBF (mean time between failures)
TimeOnCell 5004-HSPA: 441,000 hrs
OnCell 5104-HSPA: 411,000 hrs
StandardTelcordia SR332
• Warranty
Warranty Period5 years

Available Models

 Model No.Description
OnCell 5004-HSPA4-port five-band industrial GSM/GPRS/EDGE/UMTS/HSPA router, -30 to 55°C operating temperature
OnCell 5104-HSPA4-port five-band industrial GSM/GPRS/EDGE/UMTS/HSPA router, IA design, -30 to 55°C operating temperature
OnCell 5104-HSPA-T4-port five-band industrial GSM/GPRS/EDGE/UMTS/HSPA router, IA design, -30 to 70°C operating temperature

Optional Accessories

 Wireless Antenna Cable

 Model No.Description
CRF-SMA(M)/N(M)-300N-type (male) to SMA (male), CFD200 cable, 3 m

 Wireless AP Mounting Kit

 Model No.Description
WK-51-01Wall-mounting kit, 51mm wide

 Cellular Antennas

 Model No.Description
ANT-WCDMA-ASM-1.5Five-band GSM/GPRS/EDGE/UMTS/HSPA, 1.5 dBi, omni-directional, rubber duck antenna
ANT-WCDMA-AHSM-04-2.5mFive-band GSM/GPRS/EDGE/UMTS/HSPA, 4 dBi, omni-directional, magnetic base antenna
ANT-WCDMA-ANF-00Five-band GSM/GPRS/EDGE/UMTS/HSPA, 0 dBi, omni-directional, outdoor antenna
ANT-LTEUS-ASM-01GSM/GPRS/EDGE/UMTS/HSPA/LTE, 1 dBi, omni-directional, rubber duck antenna
ANT-LTE-ASM-02GPRS/EDGE/UMTS/HSPA/LTE, 2 dBi, omni-directional, rubber duck antenna

PDF文档下载

Powered by CloudDream